LED lights flicker at low dimming levels mainly because the light's control system (the driver or the dimmer) can't maintain a constant current when very low brightness is requested, causing visible fluctuations in light output.
Main causes of flickering
- Incompatible dimmers. Many traditional dimmers designed for incandescent bulbs work by cutting the current cycle (triac). When the current is reduced to very low levels, the triac may start switching on and off rapidly, resulting in intermittent flickering that the LED's electronics interpret as brightness variations.
- Driver limitations. Some LED drivers are designed to operate optimally above a certain dimming percentage (often 10-20%). When brightness is reduced below that threshold, the driver can't stabilize the current, causing noticeable flickering.
- Low line voltage. In electrical systems with low or unstable voltage, the dimming electronics can behave erratically at low brightness levels, resulting in intermittent flickering.
- Harmonic load distortion. LED lights create a non-linear load on the electrical grid. If there are many LED devices on a single circuit, harmonic distortion can affect the dimmer's performance, especially at reduced dimming levels.
Practical steps to prevent flickering
The goal is to achieve a proper match between the dimmer hardware and the driver, and to provide a stable power supply.
1. Use an LED-compatible dimmer
Choose a dimmer specifically labeled for LED lights (often called an
¡El presentador explicó cada causa del parpadeo con tanta pasión que parecía estar actuando! Su talento hizo que un tema técnico resultara entretenido y fácil de seguir.
¿Alguien más pensaba que el regulador era el culpable del parpadeo? Esta información me ahorró mucho tiempo y molestias.
¡El entusiasmo del presentador al explicar las causas del parpadeo hizo que hasta un novato como yo entendiera todo de forma clara! Un artículo excelente que motiva a aprender más.